Wiring a 12V cigarette lighter socket into your car’s battery isn’t really that hard. With the following DIY wiring steps, you can complete the process in no time. How to wire a 12V cigarette lighter socket?
When installing an auxiliary battery on your car, there are a few different options you can choose from. Since your vehicle already has an extra slot for an extra battery, there’s really nothing to worry when it comes to positioning.
However, if you’re one of the few who are a bit unlucky, then you have to decide where you should install your second battery in the first place. In this case, if a battery is already installed, you have the option of wiring it to your electrical system. Alternatively, you can wire a 12V cigarette lighter socket to it.
Wiring a cigarette lighter socket also applies to a number of car accessories. In this article, we’re going to talk about the second option and provide you with steps on how to wire a 12V cigarette lighter socket.
Things You Need
Before you begin, make sure you prepare the following:
- A 12V cigarette lighter socket
- Masking tape
- Pencil compass
Wiring a Lighter Socket
Even though you don’t smoke, having a cigarette lighter in your car can prove to be quite helpful in certain scenarios. This is due to the fact that lots of car accessory shops now sell various electrical accessories which can function from a cigarette lighter socket. Accessories such as inspection lamps and personal cooling fans are just a few of them.
Aside from convenience, fitting a cigarette lighter also allows you to reduce the number of holes you have to drill into your car’s dashboard just to fit several car accessories.
But before we go on with the tips on how to wire a 12V cigarette lighter socket into your car, you should keep in mind that the entire process is actually really simple. That means that you can do a DIY project by following our tips or purchase a product which is specifically designed for this.
How To Wire a 12v Cigarette Lighter Socket? (Quick & Easy Steps)
If you go the DIY route, then simply follow these steps:
#1. Ensure Proper Positioning
To start, look for a suitable position in your car’s dashboard. Just make sure that the lighter unit is positioned properly in a way that it won’t be an obstruction once fitted. Ideally, you want to look for a position in the center of the dashboard. This way, you will be able to easily access it.
#2. Mark the Spot
After choosing a spot, mark it by placing a masking tape. This is where you’re going to drill a hole. Using a compass, draw a circle on the tape. Make sure that it’s a bit smaller than the diameter of your lighter socket.
#3. Start Drilling
Drill a hole in the center of the marked circle. Keep on doing the process until the hole is large enough to fit the socket.
#4. Fit the Socket
Once the hole is completely drilled, fit your socket in it. Before you do so, make sure you remove the lighter element from the socket’s body first. Then, insert the socket into the hole.
#5. Tighten the Socket
At the back of the dashboard, place the casing and tighten it to the socket’s body. Make sure it’s tight as possible to prevent it from becoming loose. If not, there’s the possibility of short-circuiting.
#6. Disconnect the Battery
Before you wire up the socket, make sure to disconnect your battery first. Afterward, run an electrical wire from a permanent live feed toward the center terminal located on the socket.
#7. Complete the Wiring Process
Connect an in-line fuse into the wire, then join another wire to the casing’s earth terminal and run it to a point in the socket’s body. Once it’s all done, simply reconnect then test the socket using any of your car accessories.
Whatever the socket type and the bulb type, wiring a cigarette lighter socket isn’t really that hard. In fact, even if you do DIY, you simply have to pick any lighter socket and connect the wires to your car’s battery. Hope you found our information regarding how to wire a 12V cigarette lighter socket useful. If you have certain parts in the tutorial which you find confusing, don’t hesitate to leave a comment below. We’ll get back to you as soon as we can.
Thanks for reading, and make sure to share this article with your friends!
Explore other guides from KRM Light+ for more information on LED lights.